Connect a garden hose to a Kitchen Sink

!±8± Connect a garden hose to a Kitchen Sink

There are times when you need to want the garden hose attached to the kitchen faucet, especially if an external pin is not readily available or if you need hot water to exit the tube. Fill large bucket or container from the kitchen sink is difficult and often impossible, when the container is too large to fit in the sink. Large containers can also be very hygienic at times. A tube is a quick solution to these problems.

Connecting theKitchen faucet adapter

To start the right to work, you need an adapter to tap. This is a device that screws on the wires of the kitchen faucet, essentially extending the tap, so that fit the faucet pipe. You should be able to easily find these at your local store. First, loosen the tip of the kitchen faucet. Before doing this, but it's a good idea to cover the inside of the bowl with a towel or paper towel to remove everything that moves from left to avoid fallingDrain.

Once the valve head is removed, the screw tap adapter. The seal must be solid, but not so tight that it can not be easily removed. You should be able to make it too tight enough with just the hands.

Connect the hose adapter

Now is the time to connect the hose to the adapter. Just like when you connect to your outside tap, the tube should line up directly subject to the board. Otherwise, it will cause leaks in the seal when you go there againof. You should be able to feel when the tube is coated with just the adapter.

Check for leaks

Once drawn, now the hot or cold kitchen tap to check for leaks. If leaks occur at the source of the connection, turn off the water, the tube and screw the hose to remove the faucet. If you continue to lose, it is necessary to seal the threads with Teflon tape or sealant. Again, any hardware store can provide thisMaterials.

Once the process is complete, remove the tube, then remove the adapter and turn on the faucet head, as it was when you started. Keep material in a safe, dry place, so the next time you need to connect the hose for watering a kitchen sink, you are ready to go.